Free MCAT prep › MCAT physics equations
MCAT physics equations
Every physics equation the MCAT expects you to know, grouped by topic, with what each one means and its units. Use g = 10 m/s² on test day.
Kinematics
| Equation | What it means | Units |
| vavg = Δx / Δt | Average velocityDisplacement divided by the time it took. | m/s |
| a = Δv / Δt | AccelerationChange in velocity divided by the time it took. | m/s² |
| v = v0 + aΔt | Velocity with constant aFinal velocity equals initial velocity plus acceleration times time. | m/s |
| Δx = v0Δt + ½aΔt2 | Displacement with constant aDistance from the start velocity, plus the extra from acceleration. | meter (m) |
| v2 = v02 + 2aΔx | No-time equationUse when time is neither given nor asked for, e.g. stopping distance. | m²/s² |
| Δx = ½(v0 + v)t | No-acceleration equationAverage velocity × time, valid for constant acceleration. | m |
| vx = v cos θ, vy = v sin θ | Projectile componentsSplit the launch velocity; θ is measured from the horizontal. | m/s |
Practice these with step-by-step problems in Quanta’s kinematics lesson.
Forces and Newton’s laws
| Equation | What it means | Units |
| Fnet = ma | Newton’s second lawNet force equals mass times acceleration. | newton (N) |
| W = mg | WeightWeight equals mass times g. | newton (N) |
| fk = μkN | Kinetic frictionSliding friction equals μₖ times the normal force. | newton (N) |
| fs ≤ μsN | Static frictionStatic friction is at most μₛ times the normal force. | newton (N) |
Practice these with step-by-step problems in Quanta’s forces and newton’s laws lesson.
Torque, equilibrium and simple machines
| Equation | What it means | Units |
| τ = rFsinθ | TorqueLever arm times force times the sine of the angle between them. | newton-meter (N·m) |
| ΣF = 0 | Translational equilibriumThe forces add to zero. | newton (N) |
| Στ = 0 | Rotational equilibriumThe torques about any point add to zero. | N·m |
| MA = Fout / Fin | Mechanical advantageOutput force divided by input force. | none (a ratio) |
| Findin = Foutdout | Ideal machineWork in equals work out: less force means more distance. | newton (N) |
Practice these with step-by-step problems in Quanta’s torque, equilibrium and simple machines lesson.
Work and power
| Equation | What it means | Units |
| W = Fdcosθ | WorkWork equals force times displacement times the cosine of the angle between them. | joule (J) |
| P = W / t | PowerPower is work done per unit time. | watt (W) |
| P = Fv | Power at constant speedA force moving something at speed v delivers power Fv. | watt (W) |
| Wnet = ΔKE | Work–energy theoremThe net work on an object equals its change in kinetic energy. | joule (J) |
Practice these with step-by-step problems in Quanta’s work and power lesson.
Energy
| Equation | What it means | Units |
| KE = ½mv2 | Kinetic energyHalf the mass times the speed squared. | joule (J) |
| PEg = mgh | Gravitational potential energyMass times g times height above a chosen zero. | joule (J) |
| PEs = ½kx2 | Elastic potential energyHalf the spring constant times the stretch squared. | joule (J) |
| Ei − Wfric = Ef | Conservation with frictionStarting mechanical energy minus what friction removes (as a positive amount) equals the final energy. | joule (J) |
Practice these with step-by-step problems in Quanta’s energy lesson.
Fluids at rest
| Equation | What it means | Units |
| ρ = m / V | DensityMass per unit volume. | kg/m³ |
| P = F / A | PressureForce per unit area, acting perpendicular to the surface. | pascal (Pa) |
| P = P0 + ρgh | Pressure at depthSurface pressure plus ρgh from the fluid above. | pascal (Pa) |
| Fb = ρfluidVsubg | Buoyant force (Archimedes)Equals the weight of the fluid displaced. | newton (N) |
| F1 / A1 = F2 / A2 | Hydraulic lift (Pascal)Pressure is transmitted equally, so force scales with area. | newton (N) |
Practice these with step-by-step problems in Quanta’s fluids at rest lesson.
Fluids in motion
| Equation | What it means | Units |
| Q = Av | Flow rateVolume per second equals area times speed. | m³/s |
| A1v1 = A2v2 | ContinuityThe same flow rate passes every cross-section. | m² |
| P + ½ρv2 + ρgh = const | Bernoulli’s equationPressure + kinetic energy density + potential energy density is constant along a streamline. | pascal (Pa) |
| v = √(2gh) | Torricelli’s lawWater leaves a hole at depth h at the speed of free fall from that height. | m/s |
Practice these with step-by-step problems in Quanta’s fluids in motion lesson.
Circuits: current and resistors
| Equation | What it means | Units |
| V = IR | Ohm’s lawVoltage across a resistor equals current times resistance. | volt (V) |
| P = IV | PowerPower equals current times voltage (or I²R, or V²/R). | watt (W) = J/s |
| Req = R1 + R2 | Series resistorsResistances in series add. | ohm (Ω) |
| 1/Req = 1/R1 + 1/R2 | Parallel resistorsReciprocals of resistances in parallel add. | ohm (Ω) |
| R = ρL / A | Resistance of a wireResistivity times length over cross-sectional area. | ohm (Ω) = V/A |
Practice these with step-by-step problems in Quanta’s circuits lesson.
Capacitors
| Equation | What it means | Units |
| C = Q / V | CapacitanceCharge stored per volt. | farad (F) = C/V |
| C = κε0A / d | Parallel-plate capacitorCapacitance from geometry and the material in the gap. | farad (F) = C/V |
| U = ½CV2 | Stored energyHalf the capacitance times the voltage squared (= ½QV = Q²/2C). | joule (J) |
| Ceq = C1 + C2 | Capacitors in parallelCapacitances in parallel add. | farad (F) |
| 1/Ceq = 1/C1 + 1/C2 | Capacitors in seriesReciprocals add (the opposite of resistors). | farad (F) |
Practice these with step-by-step problems in Quanta’s capacitors lesson.
Electrostatics and magnetism
| Equation | What it means | Units |
| F = kq1q2 / r2 | Coulomb’s lawForce between two point charges; like charges repel. Doubling r quarters F. | N |
| E = F / q = kQ / r2 | Electric fieldForce per unit positive test charge; points away from + charges. | N/C = V/m |
| V = kQ / r | Electric potentialPotential energy per unit charge; a scalar, so add potentials directly. | V |
| U = qV = kq1q2 / r | Electric potential energyEnergy of a charge at potential V; negative for opposite charges. | J |
| W = qΔV | Work moving a chargeWork done by an external agent moving q through a potential difference. | J |
| E = V / d | Uniform field (parallel plates)Field between charged plates separated by d. | V/m |
| F = qvB sin θ | Magnetic force on a moving chargeZero for motion along B; use the right-hand rule for direction. | N |
| F = ILB sin θ | Magnetic force on a wireForce on a current-carrying wire in a field. | N |
| B = μ0I / 2πr | Field around a long straight wireCircles the wire; falls off as 1/r. | T |
Waves and sound
| Equation | What it means | Units |
| v = fλ | Wave speedSpeed is set by the medium; changing f changes λ, not v. | m/s |
| T = 1 / f | PeriodTime for one cycle. | s |
| β = 10 log(I / I0) | Sound levelEvery ×10 in intensity adds 10 dB; I₀ = 10⁻¹² W/m². | dB |
| f′ = f(v ± vo) / (v ∓ vs) | Doppler effectTop signs when observer and source approach each other: pitch rises. | Hz |
| λ = 2L / n | Strings and open pipesStanding waves, n = 1, 2, 3… | m |
| λ = 4L / n | Pipe closed at one endOnly odd harmonics: n = 1, 3, 5… | m |
| fbeat = |f1 − f2| | Beat frequencyTwo close frequencies produce a pulsing loudness. | Hz |
Light and optics
| Equation | What it means | Units |
| c = fλ | Speed of lightc = 3.0 × 10⁸ m/s in vacuum. | m/s |
| E = hf | Photon energyHigher frequency (shorter wavelength) means more energy per photon. | J |
| n = c / v | Index of refractionAlways ≥ 1; light slows in denser media. | none |
| n1 sin θ1 = n2 sin θ2 | Snell’s lawAngles measured from the normal; bends toward the normal entering a higher n. | — |
| sin θc = n2 / n1 | Critical angleTotal internal reflection, only going from higher n to lower n. | — |
| 1/f = 1/do + 1/di | Thin lens and mirror equationPositive d_i means a real image; f is negative for diverging lenses and convex mirrors. | m |
| m = −di / do | MagnificationNegative m means inverted; |m| > 1 means enlarged. | none |
| f = R / 2 | Spherical mirror focal lengthHalf the radius of curvature. | m |
| P = 1 / f | Lens powerIn diopters when f is in meters. | D (1/m) |
Heat and thermodynamics
| Equation | What it means | Units |
| Q = mcΔT | Heating without a phase changec is the specific heat; water’s is about 4.2 J/(g·K). | J |
| Q = mL | Phase changeTemperature stays constant while the phase changes. | J |
| ΔU = Q − W | First lawQ added to the system; W done by the system. | J |
| W = PΔV | Work by a gas at constant pressureArea under the curve on a P–V diagram. | J |
| PV = nRT | Ideal gas lawT in kelvin; R = 8.31 J/(mol·K). | — |
| ΔL = αLΔT | Thermal expansionLinear expansion; for volume use β ≈ 3α. | m |
| K = °C + 273 | Kelvin conversionA change of 1 °C equals a change of 1 K. | K |
Constants and conversions
g ≈ 10 m/s²free-fall acceleration (9.8 exactly)
k = 9 × 10⁹ N·m²/C²Coulomb constant
e = 1.6 × 10⁻¹⁹ Celementary charge
h = 6.6 × 10⁻³⁴ J·sPlanck constant
c = 3.0 × 10⁸ m/sspeed of light
R = 8.31 J/(mol·K)gas constant
1 atm ≈ 101 kPa = 760 mmHgatmospheric pressure
ρ_water = 1,000 kg/m³1 g/cm³ = 1 kg/L
1 eV = 1.6 × 10⁻¹⁹ Jelectron-volt
sin 30° = 0.5, cos 30° ≈ 0.87sin 45° = cos 45° ≈ 0.71
Memorizing isn’t the same as using them. Quanta’s physics lessons walk through each equation symbol by symbol, then give you fresh practice problems with feedback on the exact mistake you made.
Get Quanta free